Simca Plast


Simca Plast

Two-component polymer modified cement-based binder

The product includes powder and resin supplied in 9-kg packages for powdery product and 4-kg for resin product.

Consumption rate of this product depends on the thickness of layers weighing between 1.5 and 2.5 kg/m2.

Method of using this product is in such a way that for each kilogram of powder, 450 gram of resin is used and low-speed mixer is used for mixing and homogenizing. Then, the product is applied by brush, roller, or spraying. The surface of the workpiece should be clean and free from any particles and rusty plasters and colors. The thickness of creating each layer is one millimeter; and it is implemented at least in two layers with the time interval of 2 or 3 hours. In order to increase the safety factor in the corners and the intersection of perpendicular and horizontal levels, an appropriate tape could be used between the underlay and overlay.

Properties and effects

  • Appropriate chemical resistance to chlorides, salts, alkaline substances, mild inorganic acids, and oil derivatives
  • Removal of permeability, and sealing of applied sections
  • To protect the surfaces against carbonation and chloride ion
  • Lengthening and high flexibility
  • Very high cohesion to workpieces
  • Capability of bridging over the capillary cracks
  • Resistance to freezing cycles
  • Not to prevent concrete breathing
  • Resistant to UV
  • Non-toxic

Application Items

  • Sealing and humidity insulation of water and sewage treatment plants and pools
  • Isolation and removal of leakage and moistening of toilets and bathrooms
  • Sealing of concrete, stone, brick, gypsum, and cement containers
  • Sealing of water fountains and additional walls of the buildings
  • Coating of concrete lines of water & sewage supply
  • Sealing of retaining walls and elevator pit

Projects conducted

Simca Plast
Simca Plast